EZ-Flash USA Forum

picelec · **Joined:** Thu Mar 08, 2012 11:19 am **Posts:** 2

hello,

i have upgrade my ezflash vi from v107 to v108 with unbricker 2.0 with this message : you need to update firmware
and no error but a the boot no card !!!

if i lauch unbricker, ok! your ez5i can unbrick directly with no error and at the boot no card !!!

I guess the first party went wrong, how can i unbrick whis .

thanks

Mbmax · **Posted:** Fri Mar 16, 2012 12:57 am

Join the irc chan (check my sig) we will see if something can be done to unbrick it.

picelec · **Joined:** Thu Mar 08, 2012 11:19 am **Posts:** 2

thanks, my ezflash is alive in firmware 107

coveiro24 · **Joined:** Sat Aug 11, 2012 7:57 pm **Posts:** 2

My EZVi Hardware is 805
My firmware is 108a
And the kernel is Kernel 3.0 ob8

So everything is updated, the problem started when I played the game Digimon World DS, and entered the cheat random matches!
The card just crashed. I had to restart the dsi. And now the dsi just showed me the message "Turn off the console....if this problem persists contact Nintendo supporter....

I thought, I fuck or the dsi or the flashcard! So I put this card in the dsi xl, The same message.....Than I put the flashcard in the ds light, and the EZVi runs with no problem....

But now with the others consoles, the problem is the same!!!!

PLEASE, WHAT CAN I DO? :?:

??

?

P.s. I already tried to flash again the 108a firmware, but it says already updated.....also tried to use the unbricker 2.0.....but it says cant read the card, put another card......

Mbmax · **Posted:** Sun Aug 12, 2012 11:01 am

coveiro24 wrote:

P.s. I already tried to flash again the 108a firmware, but it says already updated.....also tried to use the unbricker 2.0.....but it says cant read the card, put another card......

You've followed carefully the readme of the unbricker 2.0 ?

caribou · **Joined:** Mon Aug 13, 2012 9:56 am **Posts:** 3

Hi everyone,

Since today, my Ez flash vi no longer works. In a DS Lite, the screens are blank after boot and in 3DS, it says an error has occurred on and off the console. The linker was updated with the latest firmware 108a and the latest 3.0 kernel OB8. This worked great until today.

I used the unbricker 2.0 (with another EzFlash vi and kernel 3.0 OB7 on DS lite) but after step 6 (readme.txt), I have this screen:

I don't know what to do now!!!!!!

:help:

(I'm sorry for my poor english :oops:

)

coveiro24 · **Joined:** Sat Aug 11, 2012 7:57 pm **Posts:** 2

Mbmax wrote:

coveiro24 wrote:

P.s. I already tried to flash again the 108a firmware, but it says already updated.....also tried to use the unbricker 2.0.....but it says cant read the card, put another card......

You've followed carefully the readme of the unbricker 2.0 ?

Thanks man, I forgot to take off the sd card.....
Already working!

Mbmax · **Posted:** Wed Aug 15, 2012 12:31 am

caribou wrote:

Hi everyone,

Since today, my Ez flash vi no longer works. In a DS Lite, the screens are blank after boot and in 3DS, it says an error has occurred on and off the console. The linker was updated with the latest firmware 108a and the latest 3.0 kernel OB8. This worked great until today.

I used the unbricker 2.0 (with another EzFlash vi and kernel 3.0 OB7 on DS lite) but after step 6 (readme.txt), I have this screen:

I don't know what to do now!!!!!!

:help:

(I'm sorry for my poor english :oops:

)

The internal memory of your ez5i is defective. If you are able to unsolder it and solder a new one, you can use again the unbricker to rebirth your flashcart.
If you are not able to do that and can't ask your dealer for a replacement, it's over.
Sorry.

caribou · **Joined:** Mon Aug 13, 2012 9:56 am **Posts:** 3

Thanks for the answer!

I'm sorry for the other post!

victormc · **Joined:** Tue Dec 25, 2012 8:37 am **Posts:** 2

hi!

i have a Nintendo DSi XL, with version 1.4.5
please, any solution with this new firmware?

thanks!

EZ-Flash USA Forum

EZVi firmware v108a+unbricker2.0, 3ds 4.0.0-7 ok (26/12/11)

Who is online