EZ-Flash USA Forum

路人甲 · **Joined:** Fri Dec 16, 2011 10:23 am **Posts:** 8

Mbmax wrote:

i'm not sure to understand you 路人甲.
The firmware v107 is the one embedded in the unbricker 1.01.
The firmware v106 ("a" mean that the homebrew firmware updater has been updated but not the content of the firmware) is the one released in august.

That said, could you tell me the current version of your firmware on your ez5i (check the system settings window) ?

Thank you, I am glad that my ezvi is 106a. I have never used the unbricker.

yoda · **Joined:** Tue May 12, 2009 1:57 pm **Posts:** 10

hi little question that the V107 bricked my card so I used the unbriker 1.01 which put the card in my v107a

I put the console in version 3.00 ... and j applies the 108a are what I have to still unbrick? Or will it work?

me english is bad i am french

Mbmax · **Posted:** Thu Dec 29, 2011 1:40 pm

@路人甲 : then you can update in v108a with the firmware updater as usual.

@yoda : as said in the first post in this thread, you will probably encounter a CRC error if you try to update from v107 using the v108a firmware updater.
In order to fix definitively this problem just update in v108 with the unbricker 2.0.
You don't have to find another flashcart just launch it from your ez5i, and follow the instruction of the readme.txt.

jimmyemunoz · **Posted:** Thu Dec 29, 2011 1:47 pm

I was on v106a. I updated to the new v108 firmware on a DSi (1.4.3) console and all went smooth. Great job EZ Flash Team! I can now use my card on my 3DS 3.0.0-6 perfectly. I think another user commented on the extra white screen during boot up, and I wanted to say that I have the same issue, if it can even be called an issue. All is great! EZ Flash F.T.W.

razgmaster · **Joined:** Thu Dec 29, 2011 3:08 pm **Posts:** 1

awesome, can I upgrade my flashcard to 108v from a 3ds 2.1.0-4? thanks!!

Mbmax · **Posted:** Thu Dec 29, 2011 5:22 pm

@jimmyemunoz : great. I noticed also this small delay on 3DS that MarcusRaven reported first. Will report it to the team.

@razgmaster : yes you can run the v108a updater from it.

zephyr flutist · **Joined:** Mon Dec 14, 2009 10:30 pm **Posts:** 26

Did anyone successfully update their EZ Flash from v105 to v108? Not v106 and 107.

Mbmax · **Posted:** Fri Dec 30, 2011 4:09 pm

I successfully updated from v101 to v108 with the v108a updater. No white screens anymore.

Mbmax · **Posted:** Fri Dec 30, 2011 5:07 pm

DragonBane wrote:

Ok, I got a DSi. However, it's in 1.3. Does it have to be in 1.4.3? It's my nieces, and I don't want to update it unless it's necessary. Any help would be appreciated. Also, Can I upgrade a my EZVi from its shipped version straight to v108a?

No need to update the dsi in 1.4.3. And the minimum firmware to be able to update in v108 is v101 as said in the changelog.

DragonBane · **Joined:** Mon Dec 26, 2011 11:49 am **Posts:** 7

Mbmax wrote:

DragonBane wrote:

Ok, I got a DSi. However, it's in 1.3. Does it have to be in 1.4.3? It's my nieces, and I don't want to update it unless it's necessary. Any help would be appreciated. Also, Can I upgrade a my EZVi from its shipped version straight to v108a?

No need to update the dsi in 1.4.3. And the minimum firmware to be able to update in v108 is v101 as said in the changelog.

Thanks for the quick reply! Glad I can leave it in 1.3 for her. Should have read the changelog more carefully! Successfully updated!

Mbmax · **Posted:** Fri Dec 30, 2011 6:02 pm

DragonBane wrote:

Thanks for the quick reply! Glad I can leave it in 1.3 for her. Should have read the changelog more carefully! Successfully updated!

Great news.

zephyr flutist · **Joined:** Mon Dec 14, 2009 10:30 pm **Posts:** 26

Okay I updated from v105 to v108a, it shows Sudoku Gridmaster in the menu but when I load the game, it shows a black screen. I'm going to try the unbricker soon.

@shinjikum, don't update your EZ flash yet unless you have access to another EZ Flash cart and DS/DS Lite; just to be safe.

Mbmax · **Posted:** Sat Dec 31, 2011 3:11 am

zephyr flutist wrote:

Okay I updated from v105 to v108a, it shows Sudoku Gridmaster in the menu but when I load the game, it shows a black screen. I'm going to try the unbricker soon.

@shinjikum, don't update your EZ flash yet unless you have access to another EZ Flash cart and DS/DS Lite; just to be safe.

Really ? Maybe something related to your microsd happened ?
Have you checked it ?

scynetic · **Joined:** Sat Dec 31, 2011 10:59 pm **Posts:** 1

Hey everyone,

Did the update from 103 to 108a, it said it was successful but once I restarted my DS the cart did not show up. It's not even visible in the menu. Obviously something went amuck. Be careful everyone!

gameboyflash · **Joined:** Tue Oct 04, 2011 2:21 pm **Posts:** 6

Superbe.... working great.
Some relatives wanted a flashcard, I found an EZVi reseller selling them at very low prices (13 euro), he probably assumes they won't work with 3.0.0.6 and so did lower the price because of that. To be used with NDSi and DSi-XL :lol:

EZ-Flash USA Forum

EZVi firmware v108a+unbricker2.0, 3ds 4.0.0-7 ok (26/12/11)

Who is online