EZ-Flash USA Forum

cannedpasta · **Joined:** Wed Aug 12, 2009 3:30 pm **Posts:** 47

So, am I forever stuck not being able to update?

turnaturn · **Joined:** Mon Dec 27, 2010 6:06 pm **Posts:** 11

Mbmax wrote:

Ah yes, the kernel check doesn't allow you to run the unbricker on the old kernel of the EZV, and it's normal.

Ok, try to run it from moonshell 2.10, it should be ok.

Install moonshell 2 if you don't have it already : http://filetrip.net/file.php?id=9730

T_T

it wont run on moonshell 2, using ezv,
the screen freezes on
Eject the Flashcard and insert the bricked one....

Mbmax · **Posted:** Thu Oct 27, 2011 11:52 pm

turnaturn wrote:

T_T

it wont run on moonshell 2, using ezv,
the screen freezes on
Eject the Flashcard and insert the bricked one....

Ok, i can confirm this freeze. That's strange.
I have a solution for you. Download the hbmenu from sourceforge here : http://sourceforge.net/projects/devkitpro/files/hbmenu/
Extract the file boot.nds on your ezV and launch it. Once in hbmenu, place the cursor * in front of the unbricker .nds file and run it. It should run properly.

@cannedpasta : your ez5i is in v106a and not bricked, you don't need to update in v107 to be able to use the kernel 3.0ob7 on your 3DS.

@all : Ok, i have the v1.01 and it's tested working. Expect a release very soon.

Mbmax · **Posted:** Fri Oct 28, 2011 1:48 am

The unbricker v1.01 is released !

here is the change log :

Quote:

- fixed the bug of recognition with some bricked EZ5i.

First post updated guys.

Feedback is welcomed

Lupigen · **Joined:** Tue Jun 16, 2009 6:27 pm **Posts:** 3

I'm trying 1.01 with my Vi now. Looks like it's detecting my cart, since now it identifies it as:
Your bricked card HD=705
Your bricked card Firmware=106

Looks like it's working. After the process, it's showing up in the main menu as Guilty Gear DS.

RavAlmasy · **Joined:** Wed Oct 26, 2011 8:02 pm **Posts:** 2

Success! xD
Using a DSlite and hbmenu and nothing at slot-2
Also i updated my DSixl to 1.4.3 and the flashcard is still working

Thanks for all the help, now I can play Phantom Hourglass hahah!

jk_patrick · **Joined:** Wed Mar 18, 2009 7:13 am **Posts:** 14

Mbmax wrote:

turnaturn wrote:

T_T

it wont run on moonshell 2, using ezv,
the screen freezes on
Eject the Flashcard and insert the bricked one....

Ok, i can confirm this freeze. That's strange.
I have a solution for you. Download the hbmenu from sourceforge here : http://sourceforge.net/projects/devkitpro/files/hbmenu/
Extract the file boot.nds on your ezV and launch it. Once in hbmenu, place the cursor * in front of the unbricker .nds file and run it. It should run properly.

It worked! Man I'm so happy!
I done the procedure above with EZ flash V on DS Lite.
Thanks for all the support Mbmax and EZ Team!
You are all the best do do this "miracle"
I thought my card was gone!

Thanks and God bless ya all!

NDSiCards · **Joined:** Fri Oct 28, 2011 10:10 pm **Posts:** 1

Thanks for the unbricker!

I made a little video with instructions:

And here complete instructions in Spanish: http://www.ndsicards.com/reparar-ez-fla ... 1-4-3/1920

Mbmax · **Posted:** Sat Oct 29, 2011 6:01 am

Thanks for the feedback guys and thanks for the video NDSiCards.

iNSaNe-oNe · **Joined:** Sun Aug 07, 2011 6:36 am **Posts:** 6

I tried the unbricker and it threw 4 keys at me after re-inserting the bricked card which I have to mail to the mail address specified in the readme. I just mailed 'em.

Am I the only one who has mailed them? I'm curious what you're able to detect using that four keys.

I'm on HW=805 and my bricked FW was 103.
Hope to hear soon...

Mbmax · **Posted:** Sat Oct 29, 2011 12:54 pm

You will receive a dedicated tool for your ez5i. Once used i advice you to delete it as it's only ment for one case of bricking that will probably never happen twice.

And no you are not the only one who had to email those keys.

turnaturn · **Joined:** Mon Dec 27, 2010 6:06 pm **Posts:** 11

YES !!

DS Lite, using 1.01 and EZv (2.0 + boot.nds) to unbrick 2 units of EZVi,

Big Thanks to EZ team and MbMax ^_^

Mbmax · **Posted:** Sun Oct 30, 2011 1:39 am

Here we are.

Thanks for the feedback.

Ok, we can validate this workaround for the EZ5 v1,v2 and plus.

Note that this trick is required if you use a M3 real/M3i zero as the touchpod or sakura doesn't handle properly this unbricker.

Second post edited : added the compatible host with the unbricker homebrew.

iNSaNe-oNe · **Joined:** Sun Aug 07, 2011 6:36 am **Posts:** 6

Works! Unbricked my card using the customly made unbricker. I seriously thought this would never happen, but thanks to your support it's alive again.
In my whole IT career and experience I learned that if you break something with firmware, it'll be dead for sure. From now on, with thanks to the effort of the EZ-team, I'll have to change my point of view for that.

It's pure magic.

THANKS!

But please, don't you ever make bad firmware again...

flastosh · **Joined:** Thu Dec 28, 2006 8:37 am **Posts:** 317

Quote:

Your bricked card HD=ffff
Your bricked Firmware=ffff
Can't read anything from your
bricked card, try again
Press Y to continue

I got this message with the v.1.0 but my ezi has been finally unbricked with the other version.

THANKS!

I see EZ-Team in a different light.

EZ-Flash USA Forum

EZVi kernel 3.0 OB7 and Unbricker 1.01 (26th October 2011)

Who is online