EZ-Flash USA Forum

FEFL · **Joined:** Tue Mar 09, 2010 7:13 pm **Posts:** 15

Thanks EZ-Flash Team. I found out about this and I've been waiting patiently for it! You guys are awesome!

Cherube · **Joined:** Wed May 06, 2009 12:47 pm **Posts:** 12

In fact, I thought I was posting in the DS thread :lol:

Yes, Samsung cards are quick (0.7ms access time) but on my [705] I am not able to make games work with speed below 4 !

Mbmax · **Posted:** Sun Jun 13, 2010 1:38 pm

I think i have found a bug. Again on those damn DSi XL. :evil:

Anyone else can confirm freeze problem only when special mode is enabled ?

Cherube wrote:

In fact, I thought I was posting in the DS thread :lol:

Yes, Samsung cards are quick (0.7ms access time) but on my [705] I am not able to make games work with speed below 4 !

I'm able to run in speed 3 GTA on my samsung 4GB class6 + ez5 705 + DSi.
On my DSi XL i have a random freezing bug when special mode is enabled.

The Composer · **Joined:** Thu May 06, 2010 9:37 pm **Posts:** 8

I have XL as well. As for now, I can't play GTA, because it gets a blackscreen and then doesnt work.

Also I can't switch between brightness levels.

Mbmax · **Posted:** Sun Jun 13, 2010 3:33 pm

You can't change brightness on DSi and DSi XL from kernel. This feature is only for dslite.
Hold down the SELECT Button and press the Volume/Screen Brightness Control in either direction to change the screen brightness. Also work ingame.

Ok, so now i know why you can't run GTA in special mode. Because of your DSi XL and probably also because of your microSD slow speed.
Which micosd do you have ? size, brand, class, made in ...

rtwo · **Joined:** Thu Feb 15, 2007 3:32 am **Posts:** 50

Jisatsu wrote:

So I have the EZVi with Kernel 3.0 OB1 and I upgraded the firmware to v101 and I am having problems.

Now for some reason I am unable to change the screen brightness. I press the L button, no effect. I press the brightness button in the EZFlash menu, no effect.

I've scoured this thread and checked on GBAtemp but no one has reported anything, so maybe its isolated to just mine.

This did not happen in the last RC version, and my L button is working, I checked in other games.

Hardware Specs:
Hardware Revision: H805
Firmware: 101
Nintendo DS Lite
EZFlash Vi

Same problem with a DS Lite, cant change brightness. I have a H705 version and latest firmware.
Reset back to EZVi from moonshell doesnt work anymore, upgraded to v2.10, still no luck. Is there allready a new reset.nds available for v3.0?

mike84596 · **Joined:** Fri Feb 26, 2010 8:23 pm **Posts:** 34

Small suggestion, instead of L+X or L+Y to delete/copy+paste things as introduced in RC16, Change controls to R+X and R+Y so it does not interfere with the left triggers function which is to toggle the brightness. I found it annoying every time I deleted something, I would have to readjust the lighting.

Allen_S · **Posted:** Mon Jun 14, 2010 11:07 pm

brightness control disable???
moonshell "reset" required the "EZ5i.nds" where I can find?
Wario DIY not open.... someday will work automatically??

des · **Joined:** Sun May 16, 2010 9:18 am **Posts:** 6

I have a EZFlash V card....Can I upgrade it to Kernel 3.0.OB1 ?

Mbmax · **Posted:** Tue Jun 15, 2010 5:16 am

des wrote:

I have a EZFlash V card....Can I upgrade it to Kernel 3.0.OB1 ?

No. You can't update the firmware on your ez5.
Only the ez5i is able to have fimware update and use k3.0ob1 kernel.

Allen_S wrote:

brightness control disable???

It's not the first time i see this remark. I have the same problem.
Will report that.

Allen_S wrote:

moonshell "reset" required the "EZ5i.nds" where I can find?

Cannot find for instant. Need to be coded.

Allen_S wrote:

Wario DIY not open.... someday will work automatically??

This game works, so check this thread for further information

mikends · **Joined:** Tue Jun 15, 2010 12:53 pm **Posts:** 1

Hi guys,
I have upgraded my NDSi XL with the new kernel (3.0) and firmware v101 and the result was quite disasterous. The system works but I get multiple frozen screens when try to select a game from the card menu and even I have losen some saved games that now are not recognized and I must begin from zero. All the upgrading process runned perfectly but the result is quite bad.

Allen_S · **Posted:** Tue Jun 15, 2010 2:21 pm

Do not forget to please ... I need the file "EZ5i.nds" to leave the moonshell.

Until now open GBA games without any problems .... I would say that even faster.

There is a possibility of implementing a "Softreset" for GBA games?
It may activate cheats as in DS games? (And be able to choose easily).

Thanks.

Mbmax · **Posted:** Tue Jun 15, 2010 3:14 pm

mikends wrote:

Hi guys,
I have upgraded my NDSi XL with the new kernel (3.0) and firmware v101 and the result was quite disasterous. The system works but I get multiple frozen screens when try to select a game from the card menu and even I have losen some saved games that now are not recognized and I must begin from zero. All the upgrading process runned perfectly but the result is quite bad.

Weird report. I doubt your problem is tied to the update but to your microSD.
Please check it on your PC in a dos command :
chkdsk x: /f
where x: is the letter of your microSD.

Allen_S wrote:

Do not forget to please ... I need the file "EZ5i.nds" to leave the moonshell.

Until now open GBA games without any problems .... I would say that even faster.

There is a possibility of implementing a "Softreset" for GBA games?
It may activate cheats as in DS games? (And be able to choose easily).

Thanks.

Yeah, i know about moonshell 2.10 softreset, don't worry.

Bishonen · **Joined:** Sun Aug 27, 2006 1:51 pm **Posts:** 39

Has anyone managed to get Spongebob Boating Bash (E) running on a EZ-Flash Vi / 805 with firmware 101 and Kernel 3.0.OB1?

Dosen't work for me on my Toshiba Japan 8GB SDHC... Toshiba Cards are not bad, right?

Mbmax · **Posted:** Wed Jun 16, 2010 2:07 pm

Have you tried to use special mode speed 3 or 5 with your toshiba microSD ?

EZ-Flash USA Forum

Kernel 3.0 OB1 and EZ5i firmware v101 (10th June 2010)

Who is online