EZ-Flash USA Forum

1. Rumble PAK function
Support all official rumble enabled game

You have to place the newest official savelist into shell folder to make rumble pak works properly. because we marked the rumble enabled game in the list.
you can download the list from below
http://www.ezflash.cn/zip/ezsave.zip

Manual mark the rumble enabled game in savelist.
open ezsave.lst by a hex editor, each game used 20 digital to store game name, savetype, rumble status or another thing.
the first 16 digital is the rom name, 17th bit is savetype. 18th is the rumble status. set it to 01 enable the rumble. 00 to disable.

Vibration strength have 3 level adjustment in main menu by press L+R

2. Browser RAM Expansion function
Just copy the Browser cleanrom to microsd, or patch it with hybrid tool if you have a slow card.

3. GBA function
Please use EZ4Client transfer GBAROM to microsd. because the GBAROM still need be patched to save properly. It can's work or save properly if you direct copy them to microsd. the "saver" folder which EZ4Client auto generated can be deleted.

1.Write GBA game
Highlight the GBAROM which you want to write and press R+SELECT. A to confirm, B to cancel

2. Backup Save from expansion card
Press R+X on EZ5 desktop, the saver will be saved to the GBASAVE folder. the file name is the ROMTITLE.sav. ROMTITLE is the current one written on expansion, A to confirm, B to cancel

3. Write the save to expansion card
Highlight the save file which you want to write in GBASAVE folder, and press R+Y, A to confirm, B to cancel

4. Launch the GBA game
Just press R+A

well, that clears up the usage of the 3 in 1.

when are you guys releasing this.. please release separately too = (

and the price?

Here is a list of all rumble-enabled games that appear in the new ezsave.lst

[hide=Click here to show/hide rumble-enabled ROMs]
Internal Name,Serial
SUPER PEACH,ASPJ
MPPINBALL,AP2E
MARIO&LUIGI2,ARME
MARIO&LUIGI2,ARMJ
MPPINBALL,AP2J
MARIO&LUIGI2,ARMP
PUZZLOOPDS,APLJ
SUPER PEACH,ASPE
MP HUNTERS,AMHE
MP HUNTERS,AMHP
SUPER PEACH,ASPP
MP HUNTERS,AMHJ
MAGNETICA,APLE
STARFOX CMD,ASFJ
STARFOX CMD,ASFE
CLUBHOUSE GA,ATDP
CLUBHOUSE GA,ATDE
SPYRO NEW BG,A6SE
CUSTOM ROBO,ACLJ
SPYRO NEW BG,A6SP
STARTREK:TA,ATJE
ELITEBEAT,AOSE
MFCFORNDS,AC5J
PAWAPOKE9,APIJ
PUYOPUYO15,APUJ
STARTREK:TA,ATJP
HOTELDUSK,AWIE
PICROSSDS,AXPJ
WISHROOM,AWIJ
STARFOX CMD,ASFP
ACTIONLOOP,APLP
DKRACINGDS,AWDE
[/hide]

cant wait to get the expansion..

I emailed bamboo gaming, but they didn't have any clue about the price (or they didn't want to tell me yet )

Thanks for the How to... now if a patch would come out to make the 3in1 compatible with my M3 Simply... I'd be in heaven!

A patch to make what exactly compatible with M3 simply? The rumble, the browser, or GBA games?

How about all 3?

Yeah 3in1 works ONLY with EZV... but I already have an M3 Simply so I don't want to buy the EZV, I only want the 3in1. So I'm waiting for the patch to come out before buying the 3in1 to make sure that I'd be able to run GBA, Rumble & Browser work altogether with my M3 Simply.

And what does M3DSS's kernel do when you select a GBA game? It's going to take more than a "patch" to get all that stuff working unless R4 adds it to their software and M3 later releases a mirror update (in which case, you are asking in the wrong forum).

What is on the table so far:
-Next week (still needs a lot of work, so I can't be 100% sure on that) I will release a .nds homebrew that will allow flashing and/or booting of GBA from 3in1 using any dldi enabled (read&write) slot 1 cart (including M3/R4), as well as some form of save management.
-I almost have a browser patch working, hopefully the problem I have with it is one that can be solved. At least, from R4 I have the browser booting without giving an expansion pack error now, though it crashes anyway.
-It's going to take more work to discover how to reboot to R4/M3's menu, but once that is done a quick .nds homebrew to start the 3in1 in rumble mode and go back to R4/M3's menu will be do-able. Hopefully then individual games will not need to be patched at all. No time line on this, I haven't figured out a way to dump R4's soft reset code, or whether the method is workable.

Does that explain to you why I asked "which one" now? I could see a per game patch to make rumble work, a patch to make the browser work, but the rest of it would need dedicated software since R4/M3 is unlikely to support a different brand expansion pack directly.

Blimey Cory, you're bringing new meaning to the phrase "overachiever".

Makes me shudder how many resets your DS must go through.

So that "next week" thing you guys are working on is some sort of .NDS homebrew, that once launched (from any slot1 device) will boot in GBA mode directly using the 3in1?

That would be awesome!

Question: I own both M3 Simply & EZ3 1gb (formated in NDS mode), my DS is Flashed with Flashme v7, now if I place both cards into my DS, and boot it, the EZ3 is booted and not the simply. I'm pretty sure is due to the Flashme, but is the 3in1 acting as such? Like if I have it in my Slot 2 and have my M3Simply in slot one, will my DS boot the slot2 3in1 directly?

The main reason I want the 3in1 (beside it's very low cost) is to use it for GBA purpose and use my Simply for NDS, if it supports the rumble of my DS games and the possibility of supporting the browser from my M3Simply, it would be all too perfect.

Thanks!

Same Question concerning the DS-X
Personally I use the EZ-V, but for my children the DS-X is a lot easier in use, so I hope that it also works (even if it's just for GBA) with that card.