EZ-Flash USA Forum

one more question. how do you use cheats? everything is where it should be but when choosing a game pressing Y does nothing.

EDIT: putting in USERCHEAT.DAT in the folder of your games opens it for me!

the .DAT file goes into your \EZ5Shell\ folder
and cheats need a couple of things in check:-
1. that the DAT file is in the right place and updated
2. that the rom actually supports cheats
3. that the rom is not patched? (methinks some patched roms cant use cheats?)
and finally
4. you must actually turn cheats ON in the settings menu
which is done by highlighting your rom in the file list
then touching the "reserve" icon (diffrent from diffrent skins)
which will access the settings menu where you can turn them ON

THEN you can press Y

I can not download the file.
When I click on the link tells me: Oops! This link appears to be broken.

What do I do?

About what are you talking?

Hello,

I am using a DSLite and I have an EzZ-FlashVi card.

I was running 1.90 b11 and upgraded to Firmware 12, and then to the newest v101. It boots up fine, but when I try to go into my roms folder, it freezes. Does anyone know how to fix this?

Thank you.

edit: i tried it again and this time i waited instead of turning my DS off right away. It gave a list of errors about corrupted data. So I tried CHKDSK to fix errors, and it didn't work. But apparently just moving all of the roms in the folder into a different folder fixed it. o_O

Back up and format your card!
Ps: running the 3.0OB now?

How do I use the passme feature now?

I used this a lot, I have an Ez IV and I use it to play GBA games. The patch notes didn't tell this feature was disabled, and I want to use it

You should not need a nopass to run GBA stuff from an EZ4- that can be done from the main menu. Still

There is a rebooter for GBA mode but that is neither here nor there really ( http://l33t.spod.org/~cory1492/EZDStoGBA_V2.zip ). The same buttons that launch the EZ 3 in 1 can force the GBA mode but it only loaded the NOR when I tested it (worked for the EZ2 though).

See if you can find one of the nopass dumps, as I recall running one of them- they should work while the nopass stuff gets sorted. I think the last update broke it.

Option 2 is run flashme and then forceboot the GBA slot (probably far from ideal I know).

I've tried your link and it boots the NOR of the GBA mode in ezIV. I've tried a passme dump and it didnt' work, but I remembered that I can play GBA games simply booting the EzIV from the NDS main menu.

I feel a bit stupid now. The only thing I can't do is play the NDS games I had on EzIV, but I don't use them anymore.

PD: Now the problem I have is that EzVI crashes a lot (whatever is on freezes). It happens a lot when is loading the menu, and sometimes it gives an error. I'll post this error the next time it shows.

So this is the error. I was playing DQIX (clean rom, I think) and it Freezed. I play on a DS-Lite.

I restarted EzVi and this error showed up:



PD: Now I've reformated the microsd (a SCD-02 Japan or whatever, a good one). No changes, it booted with the same error. After a few tries, I managed to boot Dragon Quest IX and it froze another time. Now if I try to boot Ez Vi I get black on both screens.

I have no clue of what's happening. The micro SD seems to run fine, but I'm going to try another one (a SCD-01) to see what happens.

PD2: Seems the same problem as Relle

PD3: Well, I reformated another time the SD, and managed to play DQIX for a bit (the patched one). After about 10 minutes of play, white screen on the bottom and black screen on the top. It seems to freeze when changing map only.

I tried to restart Ez Vi and the result was a black screen 5 times. The sixth time, I get a sad smiley made on ASCII and this message:



I had v12 firmware before updating, and after updating I checked in the options menu and it said: H805, F v101 and k3.0 OB1.

What the hell is happening? it is a true EzVi card (original package, all worked, etc), no problems prior to this. Only after updating.

PD4: After leaving the DS Lite alone for a while, Ez Vi now boots "as before" (sometimes it freezes when loading the menu, but no black screens). No luck with the DQIX random freezes too.

HI,
I have a problem and I hope I can get help from you.
3 Months ago I bougth EZ-Flash Vi for my DSI-XL ( 1.4E/805) with the SD-Card ( Scandisc 8 GB ).
I was search for the Firmware with Kernel and I think I installed the Firmware V15 with Kernel 2.0 RC10 but I am not 100% safety.
The first time it went all good and all Games works. When I installed the Firmware V101 with Kernel 3.0 OB1 all Games didn´t work
on the beginning or the Games freeze in the middle of the Game.
All Games they works with the old Firmware don´t work now.
I installed the olden version of the Firmware but it don´t work.
When I copy it on the SD-card and turn on the DSI-XL the Display is black.
Only the new Firmware V101 with Kernel 3.0 OB1 works with the above problems and all
the other Firmware and Kernel don´t work.
Is my EZ-Flash Vi death now?
Please help me !!!!

^ I think you bricked your cart...
But there might be other solutions.
The answer to your games not working could be fixed w/ special mode or eNDryptS

@yugo : black screens mean not ez5isys.bin on your microsd.
Once in firmware v101 you can only use kernels from 3.0 series.

The ob2 is coming with big icon mode and some games fixed (no need special mode to run them).